NEWS

Home > News

Mold processing of different types of corresponding content

date：2023/08/11

Mold this category, its products in the site has an important position, so today, mold manufacturers around it to carry out its knowledge content to explain, so that you can get what they want, and can on the basis of the original, To better understand the mold of this important product. So the next, mold manufacturers on the nonsense not much to come to the specific content of it, hoping to help and inspire everyone.
Mold processing, the processing of different parts, then the processing of its content is different. So the following, for different types of processing, mold manufacturers to explain their specific content, which are as follows:
Type 1: the processing site for the plane, and is open to the slot
General is the use of general motor, the most shallow part is Z to. In the direction of the opening of the knife, the general release of 0.01-0.02mm in the margin when the job.
Category 2: closed trough
Generally use a dedicated or universal electrode, and is a two-way edge, calculate the data and then processing, so as to avoid problems.
Category 3: Machining of circular contours
Its programming is to take the contour processing, the general use of special electrodes for straight processing. However, it should be noted that, should always pay attention to size control how, whether it is appropriate.