NEWS

Home > News

What are the application areas of metal stamping parts?

date：2023/08/11

     For the mold on the processing, how to reduce or even avoid defects? For this problem, but also we are more concerned about and concern, the following mold manufacturers to come back to answer, so that we can learn through, to better understand the problem, and some of the harvest, so as to make their own progress And benefited.
For the mold on the processing, how to reduce or even avoid defects? For this, we can take the following measures:
(1) the cooling fluid in the mold should be used reasonably and properly, and to keep it clean, so that it can play its due role.
(2) to improve the cooling conditions when grinding and improve, in order to obtain better cooling effect.
(3) the cutting fluid into the center of the grinding wheel, and make it into the grinding area, so as not to cause the workpiece burns and other issues.
(4) quenching stress after heat treatment should be reduced to a minimum. Therefore, after grinding, should be low-temperature aging treatment to improve the toughness of the workpiece.
(5) should eliminate its grinding stress, so as to avoid more problems.