NEWS

Home > News

What should I pay attention to when processing precision hardware parts?

date：2023/08/10

What should I pay attention to when processing hardware parts? Many friends don't pay much attention to precision hardware parts processing, which leads to various situations in the later processed products. Let's take a look with Binsen Precision.
Parts Processing
Matters needing attention when processing hardware parts:

1. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.
2. Before the machine works, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.
3. It is necessary to wait for all other personnel to leave the machine working area and remove the sundries on the workbench before starting the power supply to start the machine.
4. When the machine is working, it is forbidden to reach into the working area of the slider, and it is strictly forbidden to pick and place the workpiece by hand. Standard tools must be used when picking and placing the workpiece in the die. If any abnormal sound or malfunction of the machine is found, the power switch should be turned off immediately for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or the foot switch board, let alone put their hands in the working area of the machine or touch the moving parts of the machine with their hands.
5. When leaving get off work, you should turn off the idle power and arrange the finished products, side materials and sundries on the job to ensure a clean and safe working environment.